CreaTec capsule

Product name

CreaTec capsule

Code

2017/19A.00005

Edition

1

Approval date

18-12-2017

Physical requirements

Packaging

Utritional Facts

Expiration

The Vitalab product called CreaTec capsule has a shelf life of 3 years from date of manufacture.

Storage
Requirements

Store in tightly closed container, at 15 - 25°C. Protect from light and humidity.

Certificate of Origin

All of the below listed products are wholly made in the EU.

Distinctive signs

Production date, LOT number

Manufacturing process

Raw materials are to be put under quality check based on their unique registration number.

• Formula raw materials are to be weight out in closed system.
• After weighing, raw materials are to be homogenized, instantized and drizzled.
• Raw materials are to be mixed homogeneous according to strict regulation by industrial air mixing homogenizer.
• The content of the capsule is checked by its composition, consistence, colour.
• Gelatin and hot demineralized water are mixed under vacuum in Gelatin Melting System.
• Dyes, opacifants, and any needed water are added to the gelatin in feed tanks
• From the feed tank, the gelatin is gravity fed to dipper section, where the capsules are moulded onto stainless steel Pin Bars which are dipped into the gelatin solution. The Pin Bars pass through the upper and lower kilns of Capsule Machine Drying System.
• Once drying is complete, the Pin Bars enter the Table section which positions the capsule halves for stripping from the Pins in the Automatic section.
• Capsule fillers are used to fill gelatin capsules with powder. Capsules are fed into the machine, the filler then align, opens and accurately fills each capsule and recloses.
• The product goes to the packaging section of the factory in a sterile and closed gravity system.
• According to appearance, it is to be filled in sack, box or pack by the automatic filling system.
• Product labels, caps, sleeves are to be affixed on the product by the automatic system, induction closing as well as production number (which accompanies the whole production documentation) and expiry date are to be put on.
• Products are to be put in carton boxes and carton labels are to be affixed.

Samples are to be taken from each production number during production and they are to be retained until the end of expiry. Product sampling is to be carried out in different production phrases and their qualities are to be checked.